SFP3
High shear pump with closed impeller and patented stator for high flow and pressure. The shear is generated between the rotor and an innovative and optimized perforated stator. The shear can be optimized and increased by raising the speed of rotation. Shear rates up to 60.000 s-1 can be achieved at a maximum speed of 3600 rpm.
-
Properties
Property Max. flow 880 GPM Max suction lift 180.4 feet Max. pressure Discharge: 10 PSI Max. shear 60.000 s-1 Viscosity 1000 cPs Max. temperature 284 °F Impeller type Closed Max. drive power 60.35 hp Speed 3600 rpm Available frequency 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration Single, quench, double Available material O-ring EPDM, FKM, FEP-FKM, FFKM or similar Connections Hygienic fittings Surface finish Hygienic quality, internal welds hand polished + electropolished (wetted 0.8 μm - impeller 3.2 μm) Certificates 1935/2004 EC. FDA. USP. ATEX -
Description
High shear pump with closed impeller and patented stator for high flow and pressure. The shear is generated between the rotor and an innovative and optimized perforated stator. The shear can be optimized and increased by raising the speed of rotation. Shear rates up to 60.000 s-1 can be achieved at a maximum speed of 3600 rpm.
- Electropolished, easy to clean construction, no bacteria traps and no small clearances in order to clean the area around the O-ring
- Pressed stainless steel in 2B quality plate, extremely smooth
- Large seal cavity to clean mechanical seal properly
- Monobloc execution with std. IEC motors
Application areas
The Packo shear mixer pump is mainly used for in-line mixing, homogenisation and dispergation applications.
Mixing of two liquids:
With a large different specific gravity,
Having a large different viscosity or that are difficult to mix.
Also dispersing of:
Solids in liquids
Dispersion of gas in liquids.
