IMO
The Packo submersible cantilever pump series IMO are suitable for handling liquids with a temperature up to 200°C. They are especially constructed to handle liquids that are difficult to seal such as paints, varnishes, galvanic coatings, hot frying oil, etc. Particularly suitable for pumping liquids that are difficult to seal such as hot frying oil up to 200° C. They are also used for pumping waste water from industrial waste such as CIP, acids, condensate, etc.
-
Lastnosti
Črpalka Max. flow 1000 m3/h Differential head 60 m wc Max. Inlet pressure Atmospheric Viscosity 1000 cP Max. temperature 200 °C Tip rotor Open. semi-open or closed Max. free passage 45 mm Max. drive power 250 kW Speed 3000 rpm Na voljo frekvenca 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration No seal - cantilever Available O-ring materials FKM - EPDM - Special Connections Industrial or hygienic Surface finish Industrial finish: welds are not hand polished. final surface treatment: electropolished Certificates 1935/2004 EC. MEI. EAC -
Opis
The Packo submersible cantilever pump series IMO are suitable for handling liquids with a temperature up to 200°C. They are especially constructed to handle liquids that are difficult to seal such as paints, varnishes, galvanic coatings, hot frying oil, etc. Particularly suitable for pumping liquids that are difficult to seal such as hot frying oil up to 200° C. They are also used for pumping waste water from industrial waste such as CIP, acids, condensate, etc.
Serija črpalk IMO
Packove potopne konzolne črpalke serije IMO so primerne za prečrpavanje tekočin s temperaturo do 200 °C. Posebej so izdelane za ravnanje s tekočinami, ki jih je težko zatesniti, kot so barve, laki, galvanski premazi, vroče olje za cvrtje itd.
Delovna dolžina črpalk je 500 mm. (= najvišja raven tekočine nad sesalnim delom črpalke)
Črpalke MCP3IMO so na voljo tudi na podstavku z delovno dolžino 900 mm.
- Uporaba standardnih motorjev IEC. Črpalke MCP3IMO na ležajnem nosilcu so lahko opremljene tudi z motorji z okvirjem Nema.
- Priključek za čiščenje
- Stožčasta gred, v celoti obdelana
- Podporna cev za stebre visoke trdnosti. Trdno ohranja poravnavo med motorjem in ohišjem. Ščiti gred črpalke.
- By-pass za prelivanje
- Konzolna zasnova = brez mehanskih tesnil in drsnih ležajev. Zmanjšani izpadi in obratovalni stroški. Ni spodnjega ležaja, za mazanje teh ležajev niso potrebne cevi za olje ali vodo.
Področja uporabe
Posebej primeren za črpanje tekočin, ki jih je težko zapreti, kot je vroče olje za cvrtje do 200 °C.
Uporabljajo se tudi za črpanje odpadne vode iz industrijskih odpadkov, kot so CIP, kisline, kondenzat itd.
