GFP
The multi-phase pump is a combination of a standard centrifugal pump and a liquid ring pump both mounted together on 1 motor and 1 shaft. The centrifugal pump is used for pumping the liquid and brings the main performance of the pump. When a gas-bubble starts to build up in the eye of the centrifugal impeller, it is evacuated by the liquid ring impeller. The pump has 1 suction and 2 discharges: a main discharge of the centrifugal pump and a smaller discharge of the liquid ring pump that functions as an air and foam vent. The air/foam vent is typically connected back to the suction vessel. The GFP multi-phase pump is typically used for foamig liquids and (viscous) liquids containing gas in the food-industry. Offering a solution to liquids that are difficult to pump with standard centrifugal pumps. E.g. starch slurries & proteins
-
Proprietà
Proprietà Portata massima 400 m3/h Massima altezza di aspirazione 30 m wc Max. Inlet pressure 10 bar Viscosità 1000 cP Massima temperatura 140 °C Tipo di girante Open or closed Max. gas content 30% Massima potenza del motore 45 kW Velocità 1800 rpm Frequenza disponibile 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration Single bellow, sterile Available material O-ring EPDM, FKM, FFKM Connessioni EN1092-1 & ANSI flanges. DIN11851. SMS. RJT. Tri-Clamp Surface finish Electropolished Certificati FDA. EAC -
Descrizione della scheda
The multi-phase pump is a combination of a standard centrifugal pump and a liquid ring pump both mounted together on 1 motor and 1 shaft. The centrifugal pump is used for pumping the liquid and brings the main performance of the pump. When a gas-bubble starts to build up in the eye of the centrifugal impeller, it is evacuated by the liquid ring impeller. The pump has 1 suction and 2 discharges: a main discharge of the centrifugal pump and a smaller discharge of the liquid ring pump that functions as an air and foam vent. The air/foam vent is typically connected back to the suction vessel. The GFP multi-phase pump is typically used for foamig liquids and (viscous) liquids containing gas in the food-industry. Offering a solution to liquids that are difficult to pump with standard centrifugal pumps. E.g. starch slurries & proteins
Serie di pompe GFP
La pompa multifase è una combinazione di una pompa centrifuga standard e di una pompa ad anello liquido, entrambe montate insieme su un motore e un albero. La pompa centrifuga è utilizzata per il pompaggio del liquido e rappresenta la prestazione principale della pompa.
Quando una bolla di gas inizia a formarsi nell'occhio della girante centrifuga, viene evacuata dalla girante ad anello liquido.
La pompa ha 1 aspirazione e 2 scarichi: uno scarico principale della pompa centrifuga e uno scarico più piccolo della pompa ad anello liquido che funge da sfiato per aria e schiuma. Lo sfiato dell'aria e della schiuma è in genere collegato al serbatoio di aspirazione.