RMO
This pump series is especially produced for installation on lorries and trucks and are constructed on a stainless steel bearing pedestal. They can be equipped with an optional hydraulic or electric motor. Pumps provided with an electric motor can be powered by the batteries of the truck and can be executed in a monobloc design.These perfectly cleanable pumps have stainless steel 316L pump casings constructed in thick cold rolled plate, 100% non-porous and extremely smooth. Some of them have an investment cast casing, resulting in an even more solid design.
-
Lastnosti
Črpalka Max. flow 250 m3/h Differential head 30 m wc Max. Inlet pressure 10 bar Viscosity 1000 cP Max. temperature 140 °C Tip rotor Open / closed Max. free passage 25 mm Speed Variable Materials wetted parts 316L or similar Mechanical seal configuration Single Available material O-ring EPDM, FKM Connections Hygienic fittings Surface finish Hygienic quality, internal welds hand polished + electropolished (casing 0.8 μm - impeller 3.2 μm except for MFP series) Drive Hydraulic motor or electromotor Certificates EHEDG. 1935/2004 EC. FDA. USP. MEI. EAC -
Opis
This pump series is especially produced for installation on lorries and trucks and are constructed on a stainless steel bearing pedestal. They can be equipped with an optional hydraulic or electric motor. Pumps provided with an electric motor can be powered by the batteries of the truck and can be executed in a monobloc design.These perfectly cleanable pumps have stainless steel 316L pump casings constructed in thick cold rolled plate, 100% non-porous and extremely smooth. Some of them have an investment cast casing, resulting in an even more solid design.
Serija črpalk RMO
Ta serija črpalk je izdelana posebej za vgradnjo na tovornjake in tovorna vozila ter je izdelana na ležajnem podstavku iz nerjavnega jekla. Opremljene so lahko z opcijskim hidravličnim ali električnim motorjem. Črpalke z električnim motorjem se lahko napajajo iz akumulatorjev tovornjaka in so lahko izvedene v monoblok izvedbi.
Te popolnoma čistljive črpalke imajo ohišja iz nerjavnega jekla 316L, izdelana iz debele hladno valjane pločevine, ki je 100-odstotno neporozna in izjemno gladka. Nekatere od njih imajo investicijsko ulito ohišje, zaradi česar je njihova zasnova še bolj trdna.
- Elektropolirana konstrukcija, enostavna za čiščenje, brez lovilcev bakterij in majhnih razdalj za čiščenje območja okrog O-obroča.
- Stisnjeno ali investicijsko ulito nerjavno jeklo, robustna zasnova
- Velika tesnilna votlina za pravilno čiščenje mehanskega tesnila
- Lito masivno ležajno ohišje s podstavkom, primernim za hidravlični motor
Področja uporabe
Serija RMO se uporablja na tovornjakih za ravnanje s tekočinami v živilski industriji, kot so mleko, pivo in vino.
Uporabljajo se lahko tudi za ravnanje z AD Blue, pitno vodo in drugimi tekočinami.
