NMS
The Packo stainless steel multi-stage pumps of the NMS series can be used as a process pump under the most severe applications in the food and general industry. They can be used as a feeding pump or as a booster in some of the applications and are ideal for handling moderate flow rates at high pressure with a high pump efficiency (low energy cost). These process pumps are typically used for plate heat exchangers, filters, filling machines, high pressure CIP systems, etc.
-
Lastnosti
Črpalka Max. flow 50 m3/h Differential head 215 m wc Max. Inlet pressure 10 bar Viscosity 250 cP Max. temperature 140 °C Tip rotor Open Max. free passage 14 mm Max. drive power 45 kW Speed 3000 / 3600 rpm Na voljo frekvenca 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration Single bellow, single balanced, quench, double Available O-ring materials EPDM, FKM Connections Flanges acc. to EN1092-1/01. Tri-Clamp fittings. etc. Surface finish Industrial finish: welds are not hand polished. Final surface treatment: electropolished Certificates 1935/2004 EC. FDA. ATEX. EAC -
Opis
The Packo stainless steel multi-stage pumps of the NMS series can be used as a process pump under the most severe applications in the food and general industry. They can be used as a feeding pump or as a booster in some of the applications and are ideal for handling moderate flow rates at high pressure with a high pump efficiency (low energy cost). These process pumps are typically used for plate heat exchangers, filters, filling machines, high pressure CIP systems, etc. -
Prenosi
- Packo_NMS_INT_EN_Datasheet.pdf
- Packo__Hygienic_INT_English_Brochure.pdf
- Packo_Industrial Pumps_Disassembly-assembly FMS-NMS 185_English_Manual.pdf
- Packo_Hygienic Pumps_Disassembly-assembly_FMS-NMS 125_English_Manual.pdf
- Packo_Hygienic Pumps_Disassembly-assembly FMS-NMS 185__English_Manual.pdf
- Packo_Industrial Pumps_Disassembly-assembly_Manuals_2018 FMS-NMS 125_English_Manual.pdf
Serija črpalk NMS
Večstopenjske črpalke Packo iz serije NMS so opremljene z odprtimi investicijsko ulitimi rotorji in ohišji črpalk. Primerne so za delovanje pri zmernih pretokih in visokih tlakih.
- Velika tesnilna vdolbina, ki zagotavlja kroženje tekočine okoli tesnila.
- Masivna zasnova zaradi investicijsko ulitih ohišij črpalk in rotorjev
- Odprti rotorji: brez osnih sil na motorne ležaje
- Monoblok izvedba z običajnimi motorji IEC
Področja uporabe
Za uporabo v živilski, pivovarski, farmacevtski in kemični industriji kot črpalka za prenos in mešanje tekočih živil, pijač, zdravil, losjonov itd.
Tipična uporaba: procesna črpalka za ploščne toplotne izmenjevalnike, sisteme pasterizatorjev, filtre, polnilne stroje, mešalnike, deaeratorje, karbonatorje in visokotlačne čistilne sisteme.
Vaše ugodnosti
- Idealno za delovanje pri zmernem pretoku in visokih tlakih
- Visoka učinkovitost črpalke, ki omogoča manjšo porabo energije
- Nizke vrednosti NPSH: manjše tveganje za kavitacijo
- Elektropolirani: večja odpornost proti koroziji
- Enostavna in robustna konstrukcija ter enostavno vzdrževanje: manj izpadov
- Standardne komponente
- Enostavna namestitev
- Odprti rotorji: daljša življenjska doba ležajev
