• Properties

    Property
    Max. flow 200 m3/h
    Differential head 55 m wc
    Max. pressure Discharge: 10 bar
    Max. shear 60.000 s-1
    Viscosity 1000 cP
    Max. temperature 140 °C
    Impeller type Closed 
    Max. drive power 45 kW
    Speed 3600 rpm
    Available frequency 50 / 60 Hz 
    Materials wetted parts Stainless steel 316L or similar
    Mechanical seal configuration Single, quench, double
    Available material O-ring EPDM, FKM, FEP-FKM, FFKM or similar
    Connections Hygienic fittings 
    Surface finish Hygienic quality, internal welds hand polished + electropolished (wetted 0.8 μm - impeller 3.2 μm)
    Certificates 1935/2004 EC. FDA. USP. ATEX 
  • Description

    Packo high shear pump with open impeller and patented stator for moderate flow and pressure.

Pump series SFP2 & SFP3

High shear pump with open or closed impeller and patented stator for high flow and pressure. The shear is generated between the rotor and an innovative and optimized perforated stator. The shear can be optimized and increased by raising the speed of rotation. Shear rates up to 100.000 s-1 can be achieved at a maximum speed of 3600 rpm.

  1. Electropolished, easy to clean construction, no bacteria traps and no small clearances in order to clean the area around the O-ring
  2. Unique air handling design with cleanable air separator
  3. By-pass to casing taking care about air evacuation
  4. Monobloc execution with std. IEC motors

 

Application areas

The Packo shear mixer pump is mainly used for in-line mixing, homogenisation and dispergation applications.

Mixing of two liquids:

With a large different specific gravity,
Having a large different viscosity or that are difficult to mix.

Also dispersing of:

Solids in liquids
Dispersion of gas in liquids.

Your benefits

  • Shear rates up to 100.000 s-1
  • Highest efficiency on the market, energy saving
  • Use of std. components
  • Self pumping
  • Hygienic design, so easy to clean
  • Easy installation and maintenance
  • Very quiet operation

Performance Curves

Assembly and disassembly videos

Assembly video - Configuration with bellow seal - Seal diameter 43 mm

Assembly video - Configuration with bellow seal - Seal diameter 43 mm

Assembly video - Configuration with a sterile seal - Seal diameter 43 mm

Assembly video - Configuration with a sterile seal - Seal diameter 43 mm

Assembly video - Configuration with double seal - Seal diameter 43 mm

Assembly video - Configuration with double seal - Seal diameter 43 mm

Assembly video - Configuration with bellow seal - Seal diameter 70 mm

Assembly video - Configuration with bellow seal - Seal diameter 70 mm

Assembly video - Configuration with double seal - Seal diameter 70 mm

Assembly video - Configuration with double seal - Seal diameter 70 mm

Disassembly video - Replacement of bellow seal - Seal diameter 43 mm

Disassembly video - Replacement of bellow seal - Seal diameter 43 mm

Disassembly video - replacement sterile seal diameter 43

Disassembly video - replacement sterile seal diameter 43

Disassembly video - Replacement of bellow seal - Seal diameter 70 mm

Disassembly video - Replacement of bellow seal - Seal diameter 70 mm