These robust pumps have stainless steel 316L pump casings constructed in thick cold rolled plate and can be equipped with open or vortex investment cast impellers stainless steel 316L or similar. The pumps have a large clearance between the impeller and the pump casing and as a result they can handle solids, fibres, foils and leaves without any risk of clogging. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process. The Packo pumps of the series IFF are used in a wide range of industries and applications. You can find them in just about all industries such as vegetable industry, water treatment and textile industry as well as in e.g. biogas, biodiesel and bioethanol applications.

Request a consultation
  • Description
  • Technical details
  • Downloads



The Packo Standard industrial pump range has a very high efficiency and very low NPSH. All pumps in this series are robust and easy to maintain. There are pump models in modular concept, composed with standard components, but also submersible and industrial air handling pumps are available. The Packo basic hygienic stainless steel pumps are highly efficient and have a low NPSH value. These hygienic stainless steel pumps are robust and easy to clean. They are characterized by their modular design with interchangeable standard components. Also available as cantilever submersible pumps, vortex pumps and special pumps for water/air mixtures.

Sanitary Centrifugal Pumps

Packo sanitary centrifugal pumps have a unique design and solid design at the highest possible surface finish. All pumps are electro polished leading to a perfectly cleanable and smooth surface with increased resistance against corrosion. Packo centrifugal pumps make a true difference on food safety, electricity costs, easy maintenance and optimization of production processes. They are suitable for the most demanding hygienic applications in the food, cosmetic and pharmaceutical industries. A range of pumps for general industrial applications is also available.

Max. flow 360 m3/h
Differential head 35 m wc
Max. Inlet pressure 13 bar
Max. temperature 140 °C
Certificates EN 1935, FDA, ATEX, EAC 
Max. particle size 35 mm
Viscosity 500 cP
Speed 1500 / 1800 rpm
Max. drive power 90 kW
Available frequency 50 / 60 Hz 
Available frequency BSP thread, industrial flanges acc. to EN 1092-1/01 & 02 and ANSI (optional: hygienic fittings) 
Impeller type Open, semi-open and vortex 
Surface finish Industrial finish: welds are not hand polished. Final surface treatment: electropolished
Mechanical seal configuration Single, quench, double
Materials wetted parts Stainless steel 316L or similar