Back to pump guide
VA50 HP
The Verderair VA50-HP is a single acting, air operated,2:1 high pressure diaphragm pump (AODD) suitable for charging filter presses.
Request a consultation- Description
- Technical details
- Downloads
The Verderair high pressure series is especially suitable for charging filter presses. The higher the pressure that is achieved, the dryer and therefore lighter the filter cake will be. This results in cost savings of disposal of the filter cake. Verderair high pressure pumps are constructed to be self-regulating for filter press feeding. The high pressure pumps can run dry safely, will not over pressure, has an excellent self priming capability and is very easy to start up.
Diaphragm Pumps
The Verderair diaphragm pumps are the best solution for transfer applications that require more than just fluid to be handled. The range is excellent for viscous or sticky media, slurry and solids. The Verderair diaphragm pump series offers diaphragm pumps, varying in material (metallic, non-metallic, conductive) to drive principle (electric, pneumatic). Applications are found in chemical industry, pharmaceutical industry, solar power industry, waste water treatment, ceramic slurry, and many more. Special models are availble for ATEX, food and pharma applications.
Property | ||
---|---|---|
Max. flow | 284 l/min | |
Max. discharge pressure | 16,8 bar | |
Air conn. | 1/2" BSP/NPT | |
Liquid conn. | 2" BSP/NPT | |
Maximum suction lift (dry) | 2,5 m wc | |
Certificates | ATEX | |
Maximum suction lift (wet) | 5,5 m wc | |
Max. particle size | 6,3 mm | |
Viscosity | 20000 mPa.s | |
Max. temperature | 104 °C | |
Materials liquids parts | Aluminium, Stainless Steel, Cast Iron | |
Materials valves seats | Buna N, Geolast, Polypropylene, Kynar(PVDF), Hytrel, Santoprene, Stainless Steel, Hardened Stainless Steel, Viton | |
Materials valve balls | Acetal,Buna N, Geolast, Hytrel, Santoprene, Hardened Stainless Steel, Viton, PTFE | |
Materials diaphragms | PTFE (2 piece), PTFE (overmolded), Hytrel, Buna-N, Santoprene, Viton, Geolast | |
Material center section | Aluminium, Stainless Steel |