VP2-Speedy pH (Item-No.: 7100202)
✔ Semi-automatic calibration at 7.01 pH value
✔ Easy to maintain
✔ IP55 protection
✔ Low noise level
✔ Easy calibration process over 6.0 pH through 8.0 pH interval
✔ For acid chemical dosing
✔ Including: Schuko plug, On/Off-Switch, injection valve, foot valve,
suction tube, discharge tube
✔ Optional: Installation kit
VP2-Speedy Rx (Item-No.: 7100204)
✔ Suitable for dosing oxidants or dechlorination products
✔ Easy to maintain
✔ IP55 protection
✔ Low noise level
✔ For acid chemical dosing
✔ Including: Schuko plug, On/Off-Switch, injection valve, foot valve,
suction tube, discharge tube
✔ Optional: Installation kit
VP1-pH/Rx Fast WiFi (Item-No.: on request)
✔ Suitable for either pH or Rx
✔ OLED display
✔ Real-time display of the measured value on the instrument
(pH or Rx, depending on the setting)
✔ WiFi interface
✔ Display and graphical representation of values via smartphone app
✔ Alarm function via smartphone app
✔ Optional: Installation set
VP2-HT Basic (Item-No.: 7400001)
✔ Improved service life and performance under pressure
thanks to additional bearing in front cover
✔ Front cover with quick release fastener
✔ Flow rate display in %
✔ Password protection
✔ Fast Prime Mode
✔ LCD display with backlight
✔ Protection class IP55
✔ Power supply 90-250 VAC, 50-60 Hz
✔ Simple programming
✔ Quick and easy maintenance
✔ Alarm LED
✔ Optional: Installation set
✔ Panel version on request
Included features
- Hose break sensor
- Level probe input
- ON/OFF switch
VP2-HT Pro (Item-No.: 7400103)
✔ Improved service life and performance under pressure
thanks to additional bearing in front cover
✔ Front cover with quick release fastener
✔ Flow rate display in %
✔ Password protection
✔ Fast Prime Mode
✔ LCD display with backlight
✔ Protection class IP55
✔ Power supply 90-250 VAC, 50-60 Hz
✔ Simple programming
✔ Quick and easy maintenance
✔ Alarm LED
✔ Optional: Installation set
✔ Panel version on request
Included features
- Hose break sensor
- Level probe input
- ON/OFF switch
- Temperature probe input
- Alarm relay output
- Flow sensor input
- 3-roller rotor
All-in-one solution
VP DUAL panels consist of a VP DUAL peristaltic unit for reading and adjusting pH and Redox, fixed on a thermoplastic completely wired IP 65 back panel. They are provided fully accessorized with probes, holders, filters, buffer solutions and complete installation kits.
The panels are ready to be plugged in, after the required calibration and desired settings by the user have been input in the device.
✔ VP DUAL dosing system with built in controller
✔ PPM display for real time on screen display of the water values
(up to two decimals plus temperature)
✔ Backlit LCD display
✔ Probes are included
✔ 50 micron washable cartridge filter with probe holder are included
along with probes and buffer solutions
✔ Overdose alarm built-in (TAL System)
✔ Start-up delayStart-up delay
✔ Password protected
✔ Easy to maintain
✔ Flow rate display in %
✔ 3 operating modes: constant, ON / OFF, proportional
✔ Alarm relay (free contact)
✔ IP65 protection
✔ Temperature probe PT 100
✔ Incl. Level probe input
✔ Incl. Flow switch