• Svojstva

    Karakteristike
    Max. flow 400 m3/h
    Differential head 30 m wc
    Max. Inlet pressure 10 bar
    Viscosity 1000 cP
    Max. temperature 140 °C
    Tip rotora Open or closed 
    Max. gas content 30%
    Max. drive power 45 kW
    Speed 1800 rpm
    Dostupno frekvencija 50 / 60 Hz 
    Materials wetted parts Stainless steel 316L or similar
    Mechanical seal configuration Single bellow, sterile
    Available material O-ring EPDM, FKM, FFKM
    Connections EN1092-1 & ANSI flanges. DIN11851. SMS. RJT. Tri-Clamp 
    Surface finish Electropolished
    Certificates FDA. EAC 
  • Opis

    The multi-phase pump is a combination of a standard centrifugal pump and a liquid ring pump both mounted together on 1 motor and 1 shaft. The centrifugal pump is used for pumping the liquid and brings the main performance of the pump. When a gas-bubble starts to build up in the eye of the centrifugal impeller, it is evacuated by the liquid ring impeller. The pump has 1 suction and 2 discharges: a main discharge of the centrifugal pump and a smaller discharge of the liquid ring pump that functions as an air and foam vent. The air/foam vent is typically connected back to the suction vessel. The GFP multi-phase pump is typically used for foamig liquids and (viscous) liquids containing gas in the food-industry. Offering a solution to liquids that are difficult to pump with standard centrifugal pumps. E.g. starch slurries & proteins

Pumpa serije GFP

Višefazna pumpa je kombinacija standardne centrifugalne pumpe i pumpe s tekućim prstenom, obje zajedno montirane na 1 motor i 1 osovinu. Centrifugalna pumpa se koristi za pumpanje tekućine i donosi glavni učinak pumpe.

Kada se mjehurić plina počne nakupljati u oku centrifugalnog rotora, rotor s tekućim prstenom ga isprazni.

Crpka ima 1 usis i 2 ispusta: glavni ispust centrifugalne pumpe i manji ispust pumpe s tekućim prstenom koji funkcionira kao ventil za zrak i pjenu. Otvor za zrak/pjenu obično je spojen natrag na usisnu posudu.

  1. Monoblok izvedba sa std IEC motorima
  2. Otvor za zrak
  3. Propeler s tekućim prstenom
  4. Centrifugalni rotor
  5. Ulaz čiste vode

 

Krivulje performansi