IMXL
The Packo vertical sump pump series IMXL are designed for installation in a sump or tank, having only the casing and impeller submerged. The pumps have a length of 1500 mm having a shaft supported by a slide bearing in the liquid. These robust pumps have stainless steel 316L pressed or investment cast pump casings and can be equipped with open, semi-open, closed impellers and vortex impellers. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process. Available in ICP, MCP, IFF and MFF version with open, semi-open, closed or vortex impellers. The Packo submersible cantilever pump series IMXL are used in a wide range of industries and applications such as metal finishing industry, industrial spray washers, water treatment, galvanizing and coating industry, chemical industry, etc.
-
性能
属性 最大流量 300 m3/h 最高自吸高度 28 m wc Max. Inlet pressure - 粘度 1000 cP 最高温度 120 °C 叶轮类型 Open. semi-open or closed Max. pump length 1500 mm Max. free passage 45 mm 最大功率 22 kW 转速 1500 rpm 可用频率 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration No mechanical seals, with slide bearings Available O-ring materials EPDM, FKM, FEP-FKM, silicone 连接 Hygienic fittings. BSP fittings. flanges according to EN1092-1/01 & 02. ANSI flanges Surface finish Industrial, welds not hand polished, electropolished 认证 1935/2004 EC. FDA. EAC. ATEX -
描述
The Packo vertical sump pump series IMXL are designed for installation in a sump or tank, having only the casing and impeller submerged. The pumps have a length of 1500 mm having a shaft supported by a slide bearing in the liquid. These robust pumps have stainless steel 316L pressed or investment cast pump casings and can be equipped with open, semi-open, closed impellers and vortex impellers. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process. Available in ICP, MCP, IFF and MFF version with open, semi-open, closed or vortex impellers. The Packo submersible cantilever pump series IMXL are used in a wide range of industries and applications such as metal finishing industry, industrial spray washers, water treatment, galvanizing and coating industry, chemical industry, etc.
IMXL 系列泵
Packo IMXL 系列立式底盘泵设计用于安装在底盘或水箱中,只有外壳和叶轮浸没在水中。泵的长度为 1500 毫米,轴由液体中的滑动轴承支撑。
这些坚固耐用的泵采用 316L 不锈钢冲压或熔模铸造泵壳,可配备开式、半开式、闭式叶轮和旋涡叶轮。坚固的结构和电抛光设计使这些泵成为您生产过程中的可靠组件。
可提供 ICP、MCP、IFF 和 MFF 版本,配备开式、半开式、闭式或旋涡式叶轮。
- 使用标准 IEC 电机
- 锥形轴,完全机加工
- 高强度支柱支撑管。严格保持电机与外壳之间的对齐。保护泵轴。
- 采用碳钢/不锈钢或碳化硅/碳化硅材料的滑动轴承。不允许干运行,可选配额外的油或水冲洗管道。
- 可选配件:不锈钢底板和出水管