GFP
The multi-phase pump is a combination of a standard centrifugal pump and a liquid ring pump both mounted together on 1 motor and 1 shaft. The centrifugal pump is used for pumping the liquid and brings the main performance of the pump. When a gas-bubble starts to build up in the eye of the centrifugal impeller, it is evacuated by the liquid ring impeller. The pump has 1 suction and 2 discharges: a main discharge of the centrifugal pump and a smaller discharge of the liquid ring pump that functions as an air and foam vent. The air/foam vent is typically connected back to the suction vessel. The GFP multi-phase pump is typically used for foamig liquids and (viscous) liquids containing gas in the food-industry. Offering a solution to liquids that are difficult to pump with standard centrifugal pumps. E.g. starch slurries & proteins
-
Свойства
Характеристики Макс. дебит 400 m3/h Макс. височина на засмукване 30 m wc Max. Inlet pressure 10 bar Вискозитет 1000 cP Макс. температура 140 °C Вид на импелера Open or closed Max. gas content 30% Макс. мощност на двигателя 45 kW Оборотна скорост 1800 rpm Налична честота 50 / 60 Hz Materials wetted parts Stainless steel 316L or similar Mechanical seal configuration Single bellow, sterile Available material O-ring EPDM, FKM, FFKM Свързване EN1092-1 & ANSI flanges. DIN11851. SMS. RJT. Tri-Clamp Surface finish Electropolished Сертификати FDA. EAC -
Описание
The multi-phase pump is a combination of a standard centrifugal pump and a liquid ring pump both mounted together on 1 motor and 1 shaft. The centrifugal pump is used for pumping the liquid and brings the main performance of the pump. When a gas-bubble starts to build up in the eye of the centrifugal impeller, it is evacuated by the liquid ring impeller. The pump has 1 suction and 2 discharges: a main discharge of the centrifugal pump and a smaller discharge of the liquid ring pump that functions as an air and foam vent. The air/foam vent is typically connected back to the suction vessel. The GFP multi-phase pump is typically used for foamig liquids and (viscous) liquids containing gas in the food-industry. Offering a solution to liquids that are difficult to pump with standard centrifugal pumps. E.g. starch slurries & proteins
Серия помпи GFP
Многофазната помпа е комбинация от стандартна центробежна помпа и помпа с течен пръстен, които са монтирани заедно на 1 двигател и 1 вал. Центробежната помпа се използва за изпомпване на течността и носи основната производителност на помпата.
Когато в ухото на центробежното работно колело започне да се натрупва газово мехурче, то се евакуира от работното колело с течен пръстен.
Помпата има 1 смукателен и 2 изпускателни отвори: основен изпускателен отвор на центробежната помпа и по-малък изпускателен отвор на помпата с течен пръстен, който функционира като отдушник за въздух и пяна. Отдушникът за въздух/пяна обикновено е свързан обратно към смукателния съд.